Chimney, Flashing and Vent Leak Repair in Florence, SC
Wherever a roof meets a chimney, wall, skylight or pipe, flashing has to keep water out. That is also where many roof leaks begin.

What is roof flashing and why does it leak?
Flashing is thin metal or similar material that directs water away from joints and openings in the roof. It leaks when it rusts, lifts, cracks or loses its sealant, or when it was not installed correctly. Many leaks blamed on shingles are actually flashing problems. Call Florence Roof Care at +1 (854) 205-5010 to talk it through.
Common flashing trouble spots
| Location | What can go wrong |
|---|---|
| Chimney | Cracked mortar, loose counter-flashing, aged sealant |
| Plumbing and exhaust vents | Cracked rubber boots, loose collars |
| Roof-to-wall joints | Lifted step flashing, siding gaps |
| Valleys | Debris buildup, corrosion, worn metal |
| Skylights | Failed seals, loose flashing kits |
How flashing repair is usually done
- Confirm the source. Stains inside may be several feet from the real entry point.
- Remove failed flashing and old sealant so the surface is clean.
- Install new flashing that is layered correctly with the shingles or panels.
- Repair chimney details such as counter-flashing or masonry joints where needed.
- Check for damp decking and replace it if it is soft or stained.
Sealant alone is often a short-term patch. Ask whether the repair replaces the flashing or just covers the gap.
Signs the leak is at a joint
- Stains near a chimney, wall or vent pipe
- Leaks that appear mainly in wind-driven rain
- Visible rust, gaps or cracked sealant around openings
Our signs your roof is leaking guide covers the broader picture, and the leak repair page shows how leaks are traced.
Related roof types
Flashing details differ by roof. See shingle roof repair, metal roof repair and flat roof repair for how each handles these joints. In a historic district, exterior changes may need a Certificate of Appropriateness from the City Design Review Board, so ask early.
Step flashing, counter-flashing and vent boots
Flashing has different names depending on where it sits. Understanding them makes an estimate easier to read.
- Step flashing: small pieces woven with shingles where a roof meets a wall.
- Counter-flashing: a second layer set into masonry or siding that overlaps the base flashing, common at chimneys.
- Valley flashing: metal that lines the valley where two slopes meet.
- Pipe or vent boot: a collar, often with a rubber seal, around a pipe that passes through the roof.
- Skylight flashing: a kit or custom metal that seals around the frame.
What to ask
Ask whether the repair replaces the flashing or only adds sealant, and whether the old material is removed. The roofing glossary defines more of these terms. If the leak could also come from shingles, compare with shingle roof repair and the general roof leak repair guide.
Common questions
Can I just recaulk flashing?
Sealant can slow a small leak, but aged or lifted flashing usually needs replacement or reinstallation.
Why does my chimney leak only in heavy wind-driven rain?
Water can be pushed behind flashing or through masonry gaps that stay dry in lighter rain.
How long does flashing last?
It varies by material and exposure. Inspect it during roof checks and after major storms.
Is a vent boot a big repair?
Replacing a cracked boot is usually a small, localized repair when caught early.
Leak near a chimney or vent?
Call to describe what you see and talk through your options.
Call: +1 (854) 205-5010
Florence Roof Care, 2732 TV Rd, Florence, SC 29501
Florence Roof Care · 2732 TV Rd, Florence, SC 29501 · +1 (854) 205-5010
Sources for this page: